Step 1 – First you will need to gather your supplies.  I used 2 inch Silver Head Pins, Chalk Turquoise Flat Beads, a silver round spacer, 6mm Swarovski Crystal Tuquoise Beads and sterling silver ear wires.  You will also need a pair round nose pliers and cutters.  You can find most supplies at any Hobby Lobby or any of your local craft stores.

Step 2 – Slide your beads onto your head pin in the design you want.

Step 3 – Using cutter pliers, remove any excess wire, leaving approximately 1/4-inch of wire.

Step 4 – Using your bent nose or chain nose pliers, bend the wire to form a right angle as close to the bead as possible.

Step 6 – Open the loop from your earwire, once your dangle is connected,  close the loop back to its closed position using your pliers.

Bookmark It

Hide Sites